JN1DNG Profile


Profile of JN1DNG
Name : Yoshihisa Kawamura (Hawk)
Born : In 1952 in Gifu prefecture

Personal history
When I was a kid, I was a notorious brat, disassembling radios and clocks often. I never had any success in making them work again. This superheterodyne brat later became a radio boy. A radio boy finally became a radio operator. I have been casually involved in ham radio for 30 years. Although I always have had a certain dream for my radio life, this dream has never come true. I have never run high power and done DXing openly.

1952 Born in Yaotsu-cho Kamo county in Gifu prefecture, about 40 km North North East of Nagoya city.
Yaotsu-cho was called Nishiki village in Kami county at that time.

circa 1961 When I was in the third grade at elementary school, I made a germanium radio.
But no broadcasting stations were heard, just strange conversations instead.
Later these were found out to be ham radio operators' voice on 3.5Mhz.

circa 1962 I found that a ham radio uses 3.5Mhz. I had a strong desire to become involved in ham radio by all means at that time.
Unfortunately, I did not know how to take an exam.

1965 I entered junior high school and I belonged to a baseball club.
The baseball club activities made me forget about a ham radio
completely.

1968 Just after a graduation from junior high school, I took an exam for Phone and CW class
and passed these exams. I received the call sign of JA2QXY and built a ham radio station with a homemade
RF1/IF2 receiver and an 807 x1 transmitter.
I belonged to a radio club (JA2YFE) at high school. This radio club had a very severe policy towards CW techniques.
Those who can't do CW (both Alphabet and Japanese characters) can't be eligible for this club.
A club senior JA2KSG, also known as a demon, trained me in CW. Another club senior,
JA2HKB who had a professional radio operator's license and joined the Japanese FCC after graduation trained me CW
for Japanese characters. Since I was really vexed, I practiced CW very much and as a result, my CW techniques for Japanese characters became much better than those of JA2KSG. After learning CW for Japanese characters,
I took an exam for the second and first class ham radio operator licenses. Since I did not study at all,
I just passed the second class exam. Later I was able to pass the first class exam. It is often said when one thing goes well, another thing also goes well, too. I passed the professional radio operator's exam and professional radio
engineer's exam at the same time that I passed the first class ham radio exam.
When I was a third grade high school student, I really wanted to operate SSB. I managed to get a mechanical filter with all the money I had at that time. Since I had only one filter, I had nochoice but to make a transceiver.
The final tubes were 2 x 2B46. But no signal was heard on 21Mhz and above. Since then, I hated 21Mhz.
( Of course not due to 21Mhz itself, but just due to lack of my engineering skills)
I feel that this was the most perfect time for my ham radio life.Because I was not making any money at that time,
I was just fed by my parents and I did not have to care for my financial situation

1971 I started to live in Tokyo after persuading my mother that the stay in Tokyo will be only four years and the purpose of my stay will be for study. Instead of studying, I knocked on the door of the founder of Yaesu Musen,
JA1MP and started to work for Yaesu as a radio engineer.

1980 I devoted myself to DXing on 40m with a GP antenna together with JG1XLV.
Since my job was changed at that time, my radio life did not continue steadily.
I was using a linear amplifier with the callsign of JA2QXY/1. However, a portable station is only allowed
50W output power. I felt that operating illegally was not so good.
Later, I received the callsign of JN1DNG. I really wanted to receive JN1A**, but I failed to get this type of callsign.
My wife applied for a callsign two weeks earlier than me and received JM1W**. I should have applied for a callsign
a little bit earlier. My casual radio life continued.

circa 1986 Although I was working for an electronic company , my job had nothing to do with a transmitter.
Since I had a strong desire to build ham radio gear, I started off by making a transceiver.
I worked very hard to complete it using some pieces of measuring equipment in
the company every night after work. I went back home around midnight, or after midnight everyday.
Just in case you may misunderstand this, the reason that I went home very late everyday was not from having
visited night clubs to see nice babes, but I was concentrating on making a transceiver.

1993-94 Through the usual radio communication activities, I met up with
some nice guys who were always looking for a good sound, a strong signal, and a signal that lures other hams attention. These were the original targets of TGC members.

1995 TGC was established. I was one of the original eleven members.

in Japanese